See your water system. Plan what comes next.
Map the equipment and its connections, then compare a proposed upgrade in 3D.
Illustrative example, not a surveyed Cabo property. Replace the layout and measurements with your own.
Your model stays in this browser. No upload or automatic equipment order.
Or choose an item, then tap the map. New items need their water connections.
12 × 8 m workspace. Generic equipment geometry and schematic pipe routes. Crossings are not junctions. Drains, electrical work and service clearances require a site review.
What would you like to improve?
Leave hardness blank if unmeasured. Planning demand assumes 150 L/person/day and 10 L/min per shower + 2 L/min.
Add local reference photos
Site reference photos stay in this tab. For an editable product shape, select equipment and open Photo to editable shape. Photos do not reveal hidden pipes and are excluded from project exports.
A proposal with reasons you can inspect
Automatic suggestions use the entered connections, goals and sizing assumptions. They do not predict pressure gains, water safety or installation feasibility.
- CheckMeasure total hardness before proposing a softener. TDS cannot replace this result.
- Check1 equipment flow rating(s) are unknown. The model cannot establish adequate pressure or performance.
Adds selected concepts to the relevant outlet branch. Existing equipment is retained. UV, pumps and chemical dosing are never added automatically.